AccuSpark®
Electronic ignitions
Wiring
Diagrams
Before Installing please read the following
information
Please ensure you have
the correct kit for your distributor
The Accuspark electronic
ignition is designed only for negative ground cars only
Extreme care should be taken not to connect the black wire to any live
connection .
Ensure the coil is correctly
fitted before fitting your AccuSpark .
Ignition coils will work when connected in reverse , ensure the + terminal
is on the live side and the - side goes to the points . Incorrectly
fitted reversed coils are the most common cause of failure of the AccuSpark
module . Remove the wires from coil with the ignition on and test wires
with a volt meter or test bulb refit live wires to + terminal .
|
) 
