For camera charger(Type 1 with DC Car Cord
Assemble the Charger:
(B) Charging method
Our Battery Charger have two charging method: AC Adapter and Car cord, They allow you to charge your battery at home or in the car conveniently.
Method 1:
Power by AC Power Adapter |
Method 2:
Power by DC Car Cord |
|
(B) Check the charging status
The LED indicator will show for you the charging status. |
|
|
Here are the steps for using the charger
| 1. |
Plug the AC Adapter into the wall outlet or the DC car cord to the automobile cigarette socket.
|
| 2. |
Connect the AC Adapter or car cord to the charger DC in-jack. |
| 3. |
"Status" LED indicator show RED when the Charger is ready and "Charge" LED indicator show flashing GREEN when waiting for battery pack. |
| 4. |
Slide battery pack into the charger and "Charge" LED indicator turns RED when charging. |
| 5. |
"Charge" indicator flashes RED and GREEN alternatively when battery pack has been charged over 90%. |
| 6. |
When the battery pack is fully charged, the "Charge" LED indicator turns steady GREEN. |
| 7. |
After the battery pack fully charged, slide the battery pack out and unplug power. |
For camera charger(Type 2)
(A) Charging method
Method 1:
Install input plug to the bottom of charger base. |
Method 2:
Plug the charger in a wall outlet and start to
charge your battery. |
|
(B) Check the charging status
The LED indicator will show for you the charging status. |
|
Here are the steps for using the charger
| 1. |
Choose a correct input plug and install to the bottom of charger base. |
| 2. |
Plug the Charger into wall outlet. |
| 3. |
The LED indicator show flashing GREEN when waiting for battery pack. |
| 4. |
Slide battery pack into the charger, the LED indicator turns RED when charging. |
| 5. |
LED indicator flashes RED and GREEN alternatively when battery pack has been charged over 90% |
| 6. |
When the battery pack is fully charged, the LED indicator turns steady GREEN. |
| 7. |
After the battery pack fully charged, slide the battery pack out from the charger and unplug the charger from the outlet. |
Reading the current Firmware version
1. Turn the camera on.
A:[MENU/SET] button
B:[REC]/[PLAYBECK] selector switch
C:[Mode] button
2. Slide the [REC]/[PLAYBACK] selector switch to [ ]
3. Press [MODE] button.
|
|
4. Press [ / ] to select [NORMAL PICTURE], and then press [MENU/SET].
|
|
5. Press [MENU/SET] to display yhe menu.
You can switch menu screens from any menu item by rotating the zoom lever.
|
|
|
|
7. [ ][VERSION DISP.]
It is possible to check which version of Firmware is on the camera.
|
|
|
) 
] , and then press [
] to select the [SETUP] menu icon [
] 
