Step 1: Unpack
Take out all of the components from the boxes. These should be your Cameras, DVR, Power supply, BNC cables |
|
Next, using a Phillips head screwdriver connect the ends of each DC cord to the circuit board of the power supply. |
For All BLACK wires with WHITE STRIPE:
BLACK w/ WHITE STRIPE = POSITIVE
SOLID BLACK = NEGATIVE |
|
For All RED WIRES with a BLACK STRIPE:
RED w/ BLACK STRIPE = NEGATIVE
SOLID RED = POSITIVE |
|
|
|
Lastly, after all of the DC cords are connected to the circuit board pull the ends out through the back hole of the power supply box (Figure 2-5) and plug in your Power supply to a wall outlet (Figure 2-6). |
|
Step 3: Connecting your cameras to DVR and power supply
To connect your cameras to the DVR and Power supply you will need to use BNC cables (Figure 3-1). *Note:You should have one bundle of BNC cables per camera. |
|
Connect your camera to the BNC cable (Figure 3-2 & Figure 3-3) |
 |
Next, connect the opposite end of the BNC cable to the back of the DVR Video In (Figure 3-4). |
|
Lastly, connect the BNC cable to the Power supply DC cord. (Figure 3-5). |
|
Step 4: Connecting your router to the DVR
Connect your network cable from your router (Figure 4-1) to the back of the DVR (Figure 4-2). |
|
Step 5 (Optional): Connecting a PTZ camera to the DVR
Use a very small Phillips Head screw driver to attach the red (POSITIVE) cable to the "A" box and the black (NEGATIVE) cable to the "B" box. |
|
This completes the physical setup process! |
) 
